Vinyl roll flooring is sold in 6-foot and 12-foot widths, making it possible to install a seamless floor in smaller rooms such as bathrooms, halls and kitchens.
Allow the new vinyl floor to acclimate to the room by leaving it in the room where it'll be installed for at least 24 hours before cutting.
There are two ways to measure and fit vinyl. You can measure the entire floor area and then cut the vinyl 3 inches wider than the floor area on all sides. Then lay it in place and trim the excess. This method works well in rooms that are easy to fit with few angles or obstacles.
Alternatively, make a template of the floor layout. Transfer the template to the vinyl and make the proper cuts before laying it in place. Use this method with thicker vinyl or in rooms that are hard to fit because of angles or recesses. You may want to use an installation kit, which comes with paper, a marking pen, tape, a cutting blade and complete instructions to make an accurate pattern.
Want more information on Laminate Flooring Roll? Click the link below to contact us.