Sunshine Fencing contains other products and information you need, so please check it out.
## How to Install a Plastic Coated Chain Link Fence.
Installing a plastic coated chain link fence can be a manageable DIY project if you break it down into smaller steps. Here is a step-by-step guide to help you through the process.
### Materials Needed.
- Plastic coated chain link fence.
- Fence posts (corner, line, and gate posts).
- Top rails.
- Tension bands.
- Tie wires.
- Fence ties.
- Tension bar.
- Post hole digger or auger.
- Concrete (pre-mixed).
- Gravel.
- Level.
- Measuring tape.
- Wrenches.
- Pliers.
- Shovel.
### Step 1: Planning and Measuring.
1. **Determine the Layout**: Identify where you want to install the fence and mark the corners and ends with stakes.
2. **Measure the Perimeter**: Calculate the linear footage of the area. This will help you determine how much chain link fabric and how many posts you'll need.
3. **Mark Post Locations**: Space line posts approximately 8-10 feet apart. Ensure corners and gate positions are marked as well.
### Step 2: Preparing the Ground and Setting Posts.
1. **Dig Post Holes**: Use a post hole digger or auger to dig holes that are at least 2 feet deep and 3 times the width of the post.
2. **Add Gravel for Drainage**: Place about 6 inches of gravel at the bottom of each hole for drainage.
3. **Set Posts in Concrete**: Insert the posts into the holes and fill with mixed concrete. Use a level to ensure the posts are vertical.
4. **Allow Concrete to Set**: Let the concrete cure for at least 24 hours before proceeding.
### Step 3: Installing the Top Rails.
1. **Attach Top Rail Ends**: Fix rail ends to the terminal posts using tension bands.
2. **Insert Top Rails**: Slide the top rails into the rail ends, connecting them securely.
3. **Secure Rails with Bands**: Use pliers to tighten bands around the top rails to keep them in place.
### Step 4: Attaching the Chain Link Fabric.
1. **Unroll the Chain Link Fabric**: Lay out the chain link fabric along the length of the fence line.
2. **Hook Tension Bar**: Insert a tension bar into the first vertical row of the chain link fabric. Attach this bar to the tension bands on the terminal post.
3. **Stretch the Fabric**: Use a come-along tool to stretch the fabric alongside the fence. This ensures the fabric remains taut.
4. **Attach Fabric to Line Posts**: Use tie wires to secure the fabric to each line post. Be sure to attach it at multiple points up each post to ensure stability.
5. **Cut Excess Fabric**: Trim any excess chain link fabric using pliers.
### Step 5: Securing the Bottom of the Fence.
1. **Install Fence Ties**: Use ties specifically designed for chain link fencing to secure the bottom of the fabric to the ground.
2. **Check for Tightness**: Ensure that the entire fence is taut and that there are no loose sections.
### Step 6: Installing the Gates.
1. **Attach Gate Hinges**: Secure gate hinges to the gate posts.
2. **Mount the Gate**: Hang the gate by attaching it to the hinges. Make sure it swings freely without obstruction.
3. **Install Latch**: Fix the gate latch according to the manufacturer's instructions.
By following these steps, you can efficiently install a plastic coated chain link fence. This type of fence provides durability and low maintenance, making it a great choice for various property types.
For more information, please visit our website.